DCS C-24 Specifikace Strana 9

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 28
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 8
Chapter 3: Rack Mounting the Switch
7000 Series 1 RU – Gen 2 Quick Start Guide PDOC-00019-13 9
3.1.1 Attaching Mounting Brackets to the Chassis
To attach mounting brackets to the switch chassis, perform this procedure:
Step 1 Align the mounting brackets with the chassis to obtain the desired mounting position.
Step 2 Attach the brackets with six M4x5 flat head Phillips screws per bracket, using a #1 Phillips
screwdriver.
Space the screws evenly, separating them with the widest possible distance. Figure 6 displays
screw placement for the front and center mount positions.
3.1.2 Inserting the Switch into the Rack
Step 1 Lift the chassis into the rack. Position the flanges against the rack posts.
Figure 7 displays the front-mount switch installation.
Step 2 Select mounting screws that fit your equipment rack.
Step 3 Attach the bracket flanges to the rack posts.
After completing the two-post rack mount, proceed to Chapter 4: Cabling the Switch.
Figure 6: Attaching the Mounting Brackets to the Switch Chassis
Figure 7: Inserting the Switch into the Rack
Zobrazit stránku 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Komentáře k této Příručce

Žádné komentáře