DCS WDU models Specifikace stáhnout pdf (Strana 176)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.5.7.1.11. Select Ringer Path - #SRP

#SRP - Select Ringer Path

AT#SRP=[<n>] Set command selects the ringer path towards whom sending ringer sounds

and all signalling tones.

Parameter:

<n> - ringer path number

0 - sound output towards current selected audio path (see

command #CAP

)

1 - sound output towards handsfree

2 - sound output towards handset

3 - sound output towards Buzzer Output pin GPIO7

Note: In order to use the Buzzer Output an external circuitry must be

added to drive it properly from the GPIO7 pin, furthermore the GPIO7 pin

direction must be set to Buzzer output (Alternate function); see command

#GPIO

AT#SRP? Read command reports the selected ringer path in the format:

#SRP: <n>.

AT#SRP=? Test command reports the supported values for the parameter <n>.

Example AT#SRP=?

#SRP: (0-3)

AT#SRP=3

3.5.7.1.12. Signalling Tones Mode - #STM

#STM - Signaling Tones Mode

AT#STM=

[<mode>]

Set command enables/disables the signalling tones output on the audio

path selected with #SRP

command

Parameter:

<mode> - signalling tones status

0 - signalling tones disabled

1 - signalling tones enabled

2 – all tones disabled

Note: AT#STM=0 has the same effect as AT+CALM=2;

AT#STM=1 has the same effect as AT+CALM=0.

AT#STM? Read command reports whether the current signaling tones status is

enabled or not, in the format:

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 317 318

Žádné komentáře

DCS WDU models Specifikace Strana 176